Headquartered in Hackettstown, NJ, Rollon Corporation is an International Group that has been designing and manufacturing power transmission products since 1975. The Company has developed many families of products capable of solving a great number of problems in machine design and mechanical fields, or wherever there is the need to move machine parts using simplicity and a low coefficient of friction.

​The majority of Rollon products are based on the general principle of a C-shaped rail with internal raceways where, depending on the application, different types of sliders can move. The main advantages of the Rollon components compared to other linear solutions on the market is that they provide products that are designed to be straight forward, compact, efficient, effective, and economical.

Name Thumbnail Short Description Add to Cart
Rollon Compact Rail

This linear motion guide-rail system is an easy, precision roller bearing solution that allows for rail mis-alignment in both out-of-parallel and out-of-plane conditions. With the large rolling elements used inside the ROLLON Compact sliders, dirt and contamination are less of a problem than with that of recirculating-ball carriages. Since the Compact rail sliders run on an induction heat treated steel surface, they are able to move very fast, very quite, and with an extremely low coefficient of friction. The standard "NTE" style slider has a full body lateral seal, spring energized scrapers, and a felt wick reservoir at each end for complete self-lubrication. The easy preload setting for every Compact Guide-rail slider can be set according to the exact needs of the application so as to maintain stiffness and a low coefficient of friction.

  • Each of the guide-rail series is known by the dimension across the back of the rail mounting surface: 18, 18mm or .71"; 28, 28mm or 1.10"; 43, 43mm or 1.69"; 63, 63mm or 2.43"
  • P/N INFO
Rollon Curviline

The creativity of design engineering pushes the need for a variety of motions to the limits. Standard rotary or linear motion products do not always provide an answer. That is where the Curvi Line alternative opens a variety of design possibilities. Curvi Line is the only motion solution available that can be made to your specification. This provides you with the ultimate in creativity and flexibility.

  • Zinc-plated rails bent to your specification in low quantities
  • 3 or 4 lubed for life, high precision rollers
  • Specially designed "swivel sliders" provide consistent motion
  • Loads from 400N (90 lbf) to 1130N (254 lbf)
  • Radius as small as 120mm (4.72")
  • Maximum rail length 3140mm (123.6")
  • Standard curves of 45° and 90°
  • Constant radius curves
  • Variable and multiple radius rails
  • P/N INFO
​Rollon Easyslide

Simplicity is the distinguishing characteristic of Rollon's Easy Rail family of steel linear bearings. Designed to quickly and easily fit into demanding applications, these simple yet durable bearings provide engineers with innovative linear solutions designed to solve real world applications.

They are most suitable for applications requiring a combination of compactness, smooth movement, high load capacity, versatility, and affordability. When reliability is key and ease-of-mounting take precedence over absolute precision, Easy Rail is the ideal linear motion system.

​The Easyslide family contains five different sized sections: 22mm, 28mm, 35mm, 4mm, and 63mm - all of which offer linear precision of up to 100 microns and load capacities of several thousand pounds per slider. With many different slider lengths available per section, several hundred different combinations of solutions are possible.

Rollon X-Rail

The TEX30 offers linear whisper speeds of up to 60"/sec. Its radial ball bearings design allows for minimal friction between rail and bearing with a coefficient of friction of 0.01. Low friction provides excellent running characters even where other bearings bind or "stick".

ROLLON's size 30 X-Rail system represents one of the most suitable radial bearings design on the market presently. Yet it offers great load carrying abilities of up to 180lbs. per slider in its upright position. The rail measures a width of 1 1/8" and a height of roughly 4/5" including the slider.

The TEX30 rail is made of 316 stainless steel, its bearings of 440 stainless steel. The bearings are sealed and grease packet for life. The none harden rails make it a breeze to modify or customize them.

Rollon Telescopic Rail

Rollon's Telescopic Rail family is divided into the following types of products: Telescopic slides with hardened races; Telescopic slides with non-hardened races; and Semi-telescopic slides with rails that extend more than half of their length out of either side of the fixed part of the slide.

  • Telescopic Rails are made from cold-drawn bearing steel - never from bent sheet metal.
  • They have hardened 60 HRc races to provide the smoothest movement at all times.
  • They work well with shocks and vibrations that render other slides inoperative immediately.
  • P/N INFO
  • They have minimal deflection at the tip of the fully extended slide - even while carrying maximum loads.
  • They can reach strokes of over 2 m (6.5 ft) in one direction and can double that by doing the same out the other side.
  • Telescopic rails are also available in custom extended or reduced stroke
Rollon Light Rail

Rollon's Light Rail is best suited to applications where its more important to have lightweight rails than rails that can transfer high capacity loads. The Light Rail family of products offers a complete platform of light telescopic and semi-telescopic rails, all designed to provide maximum versatility.

The Light Rail family of products comprises nylon coated steel telescopic slides, ball aluminum or steel telescopic rails.

Rollon Eco System

Eco System's products have been designed to fit in applications where quality movement is needed at a low price. The patented design offers a well-protected, smooth slide that is easily and quickly mounted.

Eco System combines the quality associated with all of ROLLON's products with the affordability needed in application sectors like industrial protective panels, vehicle slides, and machine tool doors.

Eco System is the answer to labor intensive, homemade solutions, cheap bent steel slides, or expensive, overdesigned round or profiled shafting.

The products were designed to keep damaging dirt and particles out. The contact between the rollers and the raceways occurs inside the specially shaped profile, protected from accidental impacts and from debris and impurities.

Rollon Uniline System

The Uniline System is a belt driven actuator with compact rail bearings. The A75 Uniline offers a 275"/sec. high speed and over 20 ft. long stroke design for a wide range of applications. The A75 offers load capacities of up to 1233lbs. in radial direction a and moments of up to 1849 in-lbs. in Mz direction is prefect for applications where economics play a large factor and long strokes work against most actuators. The high speed performance do not jeopardous noise, 72DBA are very quite for this fast moving system. Its large TLV43 Compact Rail system is constructed of large radial bearings that operate on a hardened steel surface and have the ability to operate in contaminated environments. The rail is placed flat against the inside bottom of the extrusion to minimize the overall dimension 2.9" x 2.9".