Haewa Enclosures (Wall-mount) in Stainless Finish

Product Description

Wall-mount enclosure with single or double door(s) and included mounting plate.

Protective ground connection to DIN EN 61439-1, studs M6x16 on door and body (both sides – in case the door is turned around).

Doubly flanged edges and a narrow door gap prevent dust and water from entering the cabinet when opening the door.

Door(s) with seamlessly foamed gasket; Single door version: opening direction can be set to left or right hand hinge, standard is right side. Change of opening direction without drilling. Double door version: right door overlaps.

Concealed hinges made of steel; opening angle 180°.

Closure: up to a height of 400 mm with 1 turn lock, from a height of 401 mm with 2 turn locks, from 801 mm with 3-point locking, standard actuation 3 mm double-bit.

Doors with a width ≥ 300 mm and a height ≥ 400 mm are fitted on both sides with bolted reinforcement and hole profiles with fixing drillings in 25 mm increments for screws size M5.

Bottom panels with a width of ≥ 400 and a depth of ≥ 200 mm with external cable entry panel(s) made from sheet steel. Fixing takes place using Gefu-screws M4 with Torx T20

Mounting panel on the back wall with securing screw standard length M8x30, maximum 10 mm depth-adjustable. The edged mounting panel is fixed.

Wall attachment: Drill 4 holes with Ø 9 mm into wall to install wall mounting plates.

Stainless steel 1.4301 outside brushed finish.

Technical Data

• Type: Mounting plate included
• Material: Stainless steel
• Protective ground connection: according to DIN EN 61439-1
• Surface finish: Externally brushed
• Lock: completely made of stainless steel
• Mounting panel: sendzimir galvanized, 2 mm, from enclosure width/height 600×600 mm 2.5 mm, from a width/height of 801 mm edged 20 mm
• Approvals: cULus