Product Description
Wall-mount enclosure with single or double door(s) and included mounting plate.
Protective ground connection to DIN EN 61439-1, studs M6x16 on door and body (both sides – in case the door is turned around).
Doubly flanged edges and a narrow door gap prevent dust and water from entering the cabinet when opening the door.
Door(s) with seamlessly foamed gasket; Single door version: opening direction can be set to left or right hand hinge, standard is right side. Change of opening direction without drilling. Double door version: right door overlaps.
Concealed hinges made of steel; opening angle 180°.
Closure: up to a height of 400 mm with 1 turn lock, from a height of 401 mm with 2 turn locks, from 801 mm with 3-point locking, standard actuation 3 mm double-bit.
Doors with a width ≥ 300 mm and a height ≥ 400 mm are fitted on both sides with bolted reinforcement and hole profiles with fixing drillings in 25 mm increments for screws size M5.
Bottom panels with a width of ≥ 400 and a depth of ≥ 200 mm with external cable entry panel(s) made from sheet steel. Fixing takes place using Gefu-screws M4 with Torx T20
Mounting panel on the back wall with securing screw standard length M8x30, maximum 10 mm depth-adjustable. The edged mounting panel is fixed.
Wall attachment: Drill 4 holes with Ø 9 mm into wall for installation of wall mounting plates.
Sheet steel with improved pre-treatment by iron phosphating and rinsing with demineralized water as well as environmentally friendly powder coating.
Technical Data
- Type: Mounting plate included
- Material: Sheet steel
- Protective ground connection: according to DIN EN 61439-1
- Surface finish: Powder coating RAL 7035, texture finish
- Lock: plastic housing, locking bolt: GDZn black, latch: galvanized
- Mounting panel: sendzimir galvanized, 2 mm, from enclosure width/height 600×600 mm 2.5 mm, from a width/height of 801 mm edged 20 mm
- Approvals: cULus
About STOVIL
STOVIL is an authorized Häwa (Haewa) distributor and offers the domestically-stocked line of Häwa’s 0390 Series Freestanding Cabinets, 0395 Series Modular Cabinets, 3331 Series Powder Coat Enclosures, and 3351 Series Stainless Enclosures. All Häwa (Haewa) Cabinets and Enclosures offered by STOVIL are fulfilled directly from the Häwa facility in Duluth, GA. Our Häwa (Haewa) Cabinet and Enclosure product offerings are constantly improving to better accommodate the various needs of our customers including mounting plate combinations for every cabinet and enclosure listed on STOVIL’s catalog and accessories to be added in the near future.
STOVIL has a large line card tailored to the Industrial Automation market. STOVIL carries many of the top brands in product lines such as: Linear Guideways, Actuators, Ball Screws, Motion Control, Safety Products, Miscellaneous Electrical, Cabinets & Enclosures, Maintenance, Robotics, Servo Motors & Drives, Couplers, VFDs, HMIs & PLCs, Gearboxes, Feedback Devices, and Stepper Motors & Drives. These brands include (but are not limited to): Yaskawa, RTA, Brother, SANYO DENKI, Hitachi, Wieland, Häwa/Haewa, ESA Automation, American Control Electronics, Atlanta Drive Systems, HIWIN, Neugart, Rollon, CGI, Bishop Wisecarver, EDrive, R+W Coupling Technology, Tsubaki, Kabel Schlepp, Nadella, Nexen, Schneeberger, and Exlar. STOVIL is always looking for new partnerships to better serve our customers.
