HIWIN QW Series Rail

HIWIN

The QW (WE) series features equal load ratings in the radial, reverse radial and the lateral direction with contact points at 45 degrees. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. By design, it has a self-aligning capacity that can absorb most installation errors and can meet high accuracy standards. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.

SKU: QW-SERIES-RAIL Categories: , , Tag: Brand:
  • QW (WE) Series (HIWIN)
  • Interchangeable Rail
  • Available Range: 51 to 4000, use integers / whole numbers ONLY.
  • Available Range: 59 to 4000, use integers / whole numbers ONLY.
  • Available Range: 73 to 4000, use integers / whole numbers ONLY.
  • Available Range: 103 to 4000, use integers / whole numbers ONLY.
  • Max: 4000

    Should the mounting holes be centered along the length of the rail and thus have the same distance from the edge to the center of the first mounting hole ("E Value") on each side of the rail?

  • Available "E Value" Range: 5 to 36, use integers / whole numbers ONLY.
  • Available "E Value" Range: 5 to 46, use integers / whole numbers ONLY.
  • Available "E Value" Range: 5 to 56, use integers / whole numbers ONLY.
  • Available "E Value" Range: 7 to 74, use integers / whole numbers ONLY.
  • Tolerance of E value for standard rail is ± 0.5mm.
  • Also known as an "E Value".Min: 5

  • C (Normal)

  • L = Length of Rail
  • P = Pitch of Rail (distance between mounting holes on center)
  • E = “E” Dimension (distance from the edge of the rail to the first mounting hole on center)

You may also like…