HIWIN MG Series Rail

HIWIN
  1. Tiny and light weight, suitable for miniature equipment.
  2. All materials for block and rail, including rolling balls and ball retainers, are in special grade of stainless steel for anti-corrosion purpose.
  3. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
  4. Steel balls will be held by miniature retainer to avoid balls from falling out even when the blocks are removed from the rail installation.
  5. Interchangeable types are available in certain precision grades.
SKU: MG-SERIES-RAIL Categories: , , Tag: Brand:
  • MG Series (HIWIN)
  • Interchangeable Rail
  • Bottom Mount Rail
  • Bottom Mount Rail
  • Top Mount Rail
  • Top Mount Rail
  • Top Mount Rail
  • Top Mount Rail
  • Top Mount Rail
  • Top Mount Rail
  • Available Range: 11 to 250, use integers / whole numbers ONLY.
  • Available Range: 16 to 250, use integers / whole numbers ONLY.
  • Available Range: 23 to 600, use integers / whole numbers ONLY.
  • Available Range: 29 to 1200, use integers / whole numbers ONLY.
  • Available Range: 39 to 2000, use integers / whole numbers ONLY.
  • Available Range: 35 to 2000, use integers / whole numbers ONLY.
  • Available Range: 43 to 2000, use integers / whole numbers ONLY.
  • Max: 2000

    Should the mounting holes be centered along the length of the rail and thus have the same distance from the edge to the center of the first mounting hole ("E Value") on each side of the rail?

  • Available "E Value" Range: 3 to 8, use integers / whole numbers ONLY.
  • Available "E Value" Range: 4 to 11, use integers / whole numbers ONLY.
  • Available "E Value" Range: 3 to 8, use integers / whole numbers ONLY.
  • Available "E Value" Range: 4 to 13, use integers / whole numbers ONLY.
  • Available "E Value" Range: 3 to 13, use integers / whole numbers ONLY.
  • Available "E Value" Range: 4 to 17, use integers / whole numbers ONLY.
  • Available "E Value" Range: 4 to 12, use integers / whole numbers ONLY.
  • Available "E Value" Range: 4 to 27, use integers / whole numbers ONLY.
  • Available "E Value" Range: 4 to 17, use integers / whole numbers ONLY.
  • Available "E Value" Range: 4 to 27, use integers / whole numbers ONLY.
  • Available "E Value" Range: 4 to 22, use integers / whole numbers ONLY.
  • Available "E Value" Range: 5 to 36, use integers / whole numbers ONLY.
  • Available "E Value" Range: 4 to 37, use integers / whole numbers ONLY.
  • Available "E Value" Range: 5 to 36, use integers / whole numbers ONLY.
  • Tolerance of E value for standard rail is ± 0.5mm.
  • Also known as an "E Value".Min: 3

  • H (High)
  • Stainless Steel

  • L = Length of Rail
  • P = Pitch of Rail (distance between mounting holes on center)
  • E = “E” Dimension (distance from the edge of the rail to the first mounting hole on center)

You may also like…