Home » Shop » Shop » Linear Guideways » Linear Guide Rail » Cut-to-Order Rail » Genuine HIWIN HG Series Rail
Genuine HIWIN Linear Guideway, HG Series, Rail Product Image

Genuine HIWIN HG Series Rail

HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove and structure optimization. It features equal load ratings in the radial, reverse radial and lateral directions, and self-aligning to absorb installation-error. Thus, HIWIN HG series linear guideways can achieve a long life with high speed, high accuracy and smooth linear motion.

SKU: HG-SERIES-RAIL Categories: , , Tag: Brand:
  • HG Series (HIWIN)
  • Interchangeable Rail
  • Available Range: 62 to 4000, use integers / whole numbers ONLY.
  • Available Range: 78 to 4000, use integers / whole numbers ONLY.
  • Available Range: 84 to 4000, use integers / whole numbers ONLY.
  • Available Range: 98 to 4000, use integers / whole numbers ONLY.
  • Available Range: 113 to 4000, use integers / whole numbers ONLY.
  • Available Range: 140 to 4000, use integers / whole numbers ONLY.
  • Available Range: 167 to 4000, use integers / whole numbers ONLY.
  • Available Range: 201 to 4000, use integers / whole numbers ONLY.

  • Max: 4000

    Should the mounting holes be centered along the length of the rail and thus have the same distance from the edge to the center of the first mounting hole ("E Value") on each side of the rail?

  • Available "E Value" Range: 5 to 56, use integers / whole numbers ONLY.
  • Available "E Value" Range: 6 to 55, use integers / whole numbers ONLY.
  • Available "E Value" Range: 7 to 54, use integers / whole numbers ONLY.
  • Available "E Value" Range: 8 to 73, use integers / whole numbers ONLY.
  • Available "E Value" Range: 8 to 73, use integers / whole numbers ONLY.
  • Available "E Value" Range: 11 to 95, use integers / whole numbers ONLY.
  • Available "E Value" Range: 13 to 108, use integers / whole numbers ONLY.
  • Available "E Value" Range: 14 to 137, use integers / whole numbers ONLY.
  • Tolerance of "E value" for standard rail is ± 0.5mm.

  • Also known as an "E Value".Min: 5

  • C (Normal)

  • L = Length of Rail
  • P = Pitch of Rail (distance between mounting holes on center)
  • E = “E” Dimension (distance from the edge of the rail to the first mounting hole on center)
Click to Reset Configurator
Return to the HG Series Page
Return to the Home Page

You may also like…