Genuine HIWIN Linear Guideway, QW Series, Rail Product Image

HIWIN QW Series Rail Configurator

Name: HIWIN QW Series Rail Configurator
Brand: HIWIN
SKU: QWR-CUT-TO-ORDER
Availability: InStock

The QW (WE) series features equal load ratings in the radial, reverse radial and the lateral direction with contact points at 45 degrees. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. By design, it has a self-aligning capacity that can absorb most installation errors and can meet high accuracy standards. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.

SKU: QWR-CUT-TO-ORDER Categories: Cut-to-Order Rail, Linear Guide Rail, Linear Guideways Tag: Configurator Brand: HIWIN

Rail SKU

Series *

QW (WE) Series (HIWIN)
Interchangeable Rail *

Interchangeable Rail
Model Size (mm) *
Rail Mounting Type *
- Top Mount Rail
- Bottom Mount Rail
Convert Rail Mount Values to Numbers *
Rail Length Range *

Available Range: 51 to 4000, use integers / whole numbers ONLY.
Rail Length Range *

Available Range: 59 to 4000, use integers / whole numbers ONLY.
Rail Length Range *

Available Range: 73 to 4000, use integers / whole numbers ONLY.
Rail Length Range *

Available Range: 103 to 4000, use integers / whole numbers ONLY.
Rail Length (mm) *
Max: 4000
Rail Length Divided by 100 *
Rail Length Rounded Up *
Rounded Rail Length Multiplied by 100 *
Difference Rounded Length & Customer Length *
Centered Mounting Holes? *
- Centered
- Off-Center
Should the mounting holes be centered along the length of the rail and thus have the same distance from the edge to the center of the first mounting hole ("E Value") on each side of the rail?
Distance from the Edge Range *

Available "E Value" Range: 5 to 36, use integers / whole numbers ONLY.
Distance from the Edge Range *

Available "E Value" Range: 5 to 46, use integers / whole numbers ONLY.
Distance from the Edge Range *

Available "E Value" Range: 5 to 56, use integers / whole numbers ONLY.
Distance from the Edge Range *

Available "E Value" Range: 7 to 74, use integers / whole numbers ONLY.
Note - Distance from the Edge *

Tolerance of E value for standard rail is ± 0.5mm.
Distance from the Edge to the Center of the first Hole (from Left) (mm) *
Also known as an "E Value".Min: 5
Precision Code *

C (Normal)
Rail Price per Centimeter Lookup *
Calculate Price of Custom Rail *

Description

L = Length of Rail
P = Pitch of Rail (distance between mounting holes on center)
E = “E” Dimension (distance from the edge of the rail to the first mounting hole on center)

Click to Reset Configurator

Return to the QW Series Page

Return to the Home Page